CP370 angled - small 
  • Applicable for:  CP370
  • Software Version: v13.34
  • Release Date: July 2017
 

Downloading the Software


Select the software update below depending on which Multifunction Display you will be using to perform the Remote Update. Please note if you have a G Series or a/c/e/gS Series you must check what version of software you have installed in the unit that you are using to perform the upgrade. For further information on this please click here.


A Series C Series Classic E Series Classic C Series Wide E Series Wide G Series a/c/e/gS Series
A Series
NOT AVAILABLE
C Classic
NOT AVAILABLE
E Classic
DOWNLOAD
C Wide
DOWNLOAD
E Wide
DOWNLOAD

 

G Series 

 NOT PROGRAMMABLE 

 
a/c/e/gS Series
DOWNLOAD  
         

Recommend

 programming

 using an

 a/c/e/gS Display  

 before using on  

 G Series 



 

 

 

 

 

 

 



View Update Instructions |  View Latest Manual


 

Note

 


It is important that your Multifunction Display is on the latest software, which can be downloaded HERE



 

IMPORTANT TERMS OF DOWNLOADING SOFTWARE

 

This firmware update process is done at your own risk. Before initiating the update process be sure to backup and make copies of all important files

If the firmware process is interrupted your product may not function properly, therefore do not interrupt the process and ensure the unit is on a reliable power supply. Damage caused by incomplete upgrades will not be covered by Raymarine warranty. 

By Downloading the software, you agree to these terms.

 

 


Software History


Version Release Date Features
v13.34 App Jul 2017
  • Corrects the Status LED, so inform the user when a transducer is not being sensed by the SONAR (one amber blink)
  • Changes the way the CP370 communicates over Ethernet, as it was discovered when networked along with a Digital Radar, it could cause the Digital Radar to reset after an intermittent period of time.
    • Note, once upgraded to v13.34 you cannot downgrade back to v13.30
 
v15.02 Platform  Jul 2017
  • Production Release Only, to support component obsolescence - no end user enhancements
 
v13.30 App Mar 2015
  • Modifies test program in production. No functionality changes seen by end user.
 
v13.27 App / v13.28 Platform Feb 2015
  • Initial Release